ATTO Technology diamond array vt 사용자 설명서
16
Accessing the array
SNMP
SNMP, or Simple Network Management
Protocol, is an application layer protocol that
allows network devices to exchange management
information. Through a combination of standard
and custom MIBs (Management Information
Base), the Diamond-VT provides status and error
indications to an SNMP server, allowing the
SNMP, or Simple Network Management
Protocol, is an application layer protocol that
allows network devices to exchange management
information. Through a combination of standard
and custom MIBs (Management Information
Base), the Diamond-VT provides status and error
indications to an SNMP server, allowing the
Array to be managed with other devices in a
complex system through a common interface.
complex system through a common interface.
You use CLI commands to configure up to six
unique Trap addresses. A trap is a way for the
Diamond-VT to tell the SNMP server that
something has happened.
unique Trap addresses. A trap is a way for the
Diamond-VT to tell the SNMP server that
something has happened.
Exhibit 4.0-1 The POST information displayed after boot of the Diamond-VT.
Initialization Complete
Diamond Storage Array
(c) 2004 ATTO Technology, Incorporated.
Firmware version A21R release date Apr 30 2004, 11:14:42 Build A21R
Power-On Self-Test Completion Status: GOOD
128 Megabytes of RAM Installed.
Interface Port 0 is not installed.
Interface Port 1 is not installed.
Interface 0 World Wide Name = 20 00 00 10 86 10 45 64
Interface 1 World Wide Name = 20 00 00 10 86 10 45 64
Diamond Array Serial Number = “MIDP100463”
Diamond Array Name = “ “
System Serial Number = “ “
Active Configuration = ATTO
DiamondClass = (T)84
Internal Temperature = 25 C [5 - 47]
ErrorLog Contents: NO ERRORS
For help, type HELP.
Ready.