ATTO Technology diamond array vt 사용자 설명서
36
CLI: Fibre Channel
FcPortList
Lists the status of all available Fibre Channel ports.
Lists the status of all available Fibre Channel ports.
Immediate command: FcPortList
FcPortName
Returns the Fibre Channel port name stored in NVRAM
for this Fibre Channel port.
Returns the Fibre Channel port name stored in NVRAM
for this Fibre Channel port.
Get syntax: get FcPortName [port number]
FcScsiBusyStatus
Specifies the SCSI status value returned when the
Diamond is unable to accept a SCSI command because of
a temporary lack of resources.
Specifies the SCSI status value returned when the
Diamond is unable to accept a SCSI command because of
a temporary lack of resources.
Default: busy
Actions: set FcScsiBusyStatus [busy | qfull]
Requires a SaveConfiguration Restart command
Get syntax: get FcScsiBusyStatus
Actions: set FcScsiBusyStatus [busy | qfull]
Requires a SaveConfiguration Restart command
Get syntax: get FcScsiBusyStatus
FcWWName
Sets or view the Word Wide Name (WWPN) of the
referenced Fibre Channel port. The WWPN is a unique 8-
byte number that identifies the port on a Fibre Channel
network. Only the three least significant bytes of the
WWPN can be modified. Fabric and loop operations are
unpredictable if duplicate WWNs are assigned.
Sets or view the Word Wide Name (WWPN) of the
referenced Fibre Channel port. The WWPN is a unique 8-
byte number that identifies the port on a Fibre Channel
network. Only the three least significant bytes of the
WWPN can be modified. Fabric and loop operations are
unpredictable if duplicate WWNs are assigned.
Default: 20 00 0x where x is for 0 for port 0, 1 for port 1
Set syntax: set FcWWName [PortNumber [0 | 1]
Requires a SaveConfiguration Restart command
Get syntax: get FcWWName [PortNumber [0 | 1]
Set syntax: set FcWWName [PortNumber [0 | 1]
Requires a SaveConfiguration Restart command
Get syntax: get FcWWName [PortNumber [0 | 1]