Bosch ltc-0335-28 설치 설명서

Bosch Video Management System

 Concepts | en

Bosch Sicherheitssysteme GmbH

Configuration Manual

Configuration Client | V3 | 2010.07

Bosch Video Management System remote connection to a Bosch Allegiant matrix switch

Perform the following tasks to configure the control channel:

–

Wiring

–

Installing the software

–

Creating Allegiant configuration file

–

Adding the Allegiant matrix to Bosch Video Management System

–

Configuring user names

To configure the control channel between Bosch Video Management System and the Allegiant 

matrix, connect one PC through an RS-232 serial port to the Allegiant's console port (use the 

specified Bosch cable for connection). This can be the Bosch Video Management System 

Central Server, or any other PC on the network.

1.

Stop the Central Server service if running (Start > Control Panel > Services > Right-click 

Bosch VMS Central Server > Stop)

2.

Install the Allegiant Master Control Software on the Central Server and on the Allegiant PC 

(if present).

Bosch Video Management System Client workstations

Central Server with Master Control Software

Network

Allegiant PC with Master Control Software

RS-232 connection

Allegiant matrix