Bosch ltc-0335-28 설치 설명서

en | Devices page

Bosch Video Management System

Configuration Client | V3 | 2010.07

Configuration Manual

Bosch Sicherheitssysteme GmbH

Allows you to assign detected encoders to an NVR. This is required to store the video data of 

the encoder on an NVR and to manage events of their assigned devices. 

Unassigned devices do not appear in the Device Tree.

Displays the unassigned encoders that were detected.

Displays assigned encoders and NVRs. NVRs are automatically assigned when they are 

detected. For assigning encoders you must drag them from the Unassigned Encoders list to 

an NVR.

Displays the detected decoders.

Click to display the IP Device Configuration dialog box.

Click to display the next page of this dialog box. If the device names differ from their names in 

Bosch Video Management System, a dialog box is displayed for changing the names as 

required.

Click to confirm the scan results and the assignments of encoders and close the dialog box.

Main window > 

 Devices > 

 VRM & iSCSI Devices Scan

Allows you to detect the following devices and assign them to Bosch Video Management 

System:

–

VRMs, iSCSI storage devices (you can assign encoders during the scan process)

–

Live only and local storage encoders

–

VIDOS  NVRs

Click to assign selected devices to their parent device. For example you assign encoders to a 

VRM.

Click to assign all scanned devices to their parent device.

Click to remove a device from its parent device. The recordings of a removed device are not 

removed. You can find them when you add this device again.

Only devices in the local subnet are detected automatically. If a device is located in another 

subnet, add it manually to the Device Tree. To perform this, right-click the required node (for 

example an NVR), click Add Encoder, type the IP address of the device, click the Network tab 

and enter the subnet mask of the device.