Bosch ltc-0335-28 설치 설명서
Bosch Video Management System
Configuring devices | en
25
Bosch Sicherheitssysteme GmbH
Configuration Manual
Configuration Client | V3 | 2010.07
To add a communication device:
1.
Expand ,
right-click
and
click the required command.
The appropriate dialog box is displayed.
2.
Enter the appropriate settings.
3.
Click OK.
The communication device is added to your system.
To add a peripheral device:
1.
Expand ,
right-click
and
click the required command.
The appropriate dialog box is displayed.
2.
Enter the appropriate settings.
3.
Click OK.
The peripheral device is added to your system.
To add a virtual input:
1.
Expand ,
click .
The corresponding page is displayed.
2.
Click Add Inputs.
A row is added to the table.
3.
Make the appropriate settings.
4.
Click Add .
The virtual input is added to your system.
To add a network monitoring device:
1.
Expand
, right-click
and click Add SNMP.
The Add SNMP dialog box is displayed.
2.
Type a name for the SNMP device.
The network monitoring device is added to your system.
To add a CCTV keyboard:
1.
Expand ,
click .
The corresponding page is displayed.
2.
Click Add Keyboard.
A row is added to the table.
3.
Make the appropriate settings.
The keyboard is added to your system.
To add an I/O module:
1.
Expand
, right-click
and click Add New ADAM.
The Add dialog box is displayed.
2.
Type the IP address of the device.
If you want to skip the currently selected device and jump to the next one, click Skip.
3.
Select the device type.
The corresponding page is displayed.
4.
Click the Inputs tab to change the display names of the inputs if required.