Lexmark 2580 사용자 가이드
Setting Top-of-Form
Top-of-Form sets the first line of print. Use the control panel to save your Top-of-Form settings for continuous forms,
cut forms, and for each macro enabled.
cut forms, and for each macro enabled.
Setting Top-Of-Form for continuous forms in push mode
1
Clear the paper path.
The Paper Out light blinks if no paper is loaded. If the Paper Out light is off, tear off excess forms, and then press
Load/Unload. If a cut form is loaded, press FormFeed to clear the paper path.
Load/Unload. If a cut form is loaded, press FormFeed to clear the paper path.
2
Make sure the paper select lever is in the position.
3
Load continuous form paper on the push tractor feed pins (or the Tractor 2 feed pins if you are using the optional
Tractor 2 Feeder).
Tractor 2 Feeder).
4
Press FormFeed.
The paper moves to the current Top-Of-Form, and the Paper Out light goes off.
5
Open the control panel cover to access layer 2.
6
Press any paper movement button (LineFeed, Micro , Micro ) to align the horizontal lines located on the platen
with the Top-Of-Form you want.
with the Top-Of-Form you want.
Note: If you press and hold a paper movement button, the paper advances in micro movements and then goes
into continuous feed.
into continuous feed.
7
Press Set TOF to set and save your Top-Of-Form.
8
Close the control panel cover.
9
To verify the new Top-Of-Form, press Load/Unload to unload the continuous forms paper, and then press
FormFeed to reload the continuous forms paper.
FormFeed to reload the continuous forms paper.
The continuous forms paper loads to the current Top-Of-Form setting.
10
Press Start/Stop to set the printer online.
Note: If Auto Tear Off is set to On, the paper will advance to the Tear Off position. Sending a print job or pressing
Tear Off returns the paper to the current Top-Of-Form.
Tear Off returns the paper to the current Top-Of-Form.
Loading paper
40