EIKI lc-xs25 사용자 가이드

To the AC outlet.
(200 - 240 V AC)

This  projector  uses  nominal  input  voltages  of  100-120  V 
or  200-240  V AC.    This  projector  automatically  selects 
the  correct  input  voltage.    It  is  designed  to  work  with 
single-phase  power  systems  having  a  grounded  neutral 
conductor.    To  reduce  the  risk  of  electrical  shock,  do  not 
plug into any other type of power system.
Consult your authorized dealer or service station if you are 
not sure of the type of power being supplied.
Connect the projector with all peripheral equipment before 
turning the projector on. (See pages 14-16 for connection.) 

AC power cord must meet requirement of the country where you use the projector.
Confirm the AC plug type with the chart below and proper AC power cord must be used.
If supplied AC power cord does not match your AC outlet, contact your sales dealer.

To power cord 
connector on your 
projector.

Ground

To the AC outlet.
(120 V AC)

To the AC outlet.
(200 - 240 V AC)

  

The AC  outlet  must  be  near  this  equipment  and  must  be  easily 
accessible.



 

   

Unplug  the AC  power  cord  when  the  projector  is  not  in  use.  
When  this  projector  is  connected  to  an  outlet  with  the AC 
power  cord,  it  is  in  Stand-by  mode  and  consumes  a  little 
electric power.

Connect  the AC  power  cord 
(supplied) to the projector.