EIKI lc-xs25 사용자 가이드

Turn off the projector, and unplug the AC power cord from 
the AC outlet.

First, clean up the dust on the projector and around the air 
vents.

Loosen 2 screws of the filter cover with a screwdriver and 
open the filter cover.

Put  the  new  one  back  into  the  position  and  rotate  back 
the  handle.  Make  sure  that  the  filter  cartridge  is  properly 
and  fully  inserted.  Close  the  filter  cover  and  tighten  the  2 
screws back into position.

CAUTION
Make sure the filter cartridge is inserted in the projector. 
If the filter cartridge is not inserted, the projector cannot 
be turned on. 
Do not put anything into the air vents. Doing so may 
result in malfunction of the projector.

Reset the filter counter and the scroll counter (p.59).

Filter cover

Rotate the handle of the filter and pull out the filter 
cartridge. 

Screws

Filter cartridge

RECOMMENDATION

We  recommend  avoiding  dusty/smoky  environments  when 
operating  the  projector.  Usage  in  these  environments  may 
cause a poor image quality.

When  using  the  projector  under  dusty  or  smoky  conditions, 
dust  may  accumulate  on  a  lens,  liquid  crystal  panels,  or 
optical  elements  inside  the  projector.  Such  condition  may 
degrade the quality of the projected image.
When  the  symptoms  above  are  noticed,  contact  your 
authorized dealer or service station for proper cleaning.

ORDER REPLACEMENT FILTER CARTRIDGE

Replacement filter cartridge can be ordered through 
your  dealer.  When  ordering,  give  the  following 
information to the dealer.

  ●    Model No. of your projector
 

 

  LC-XS25/LC-XS30

  ●    Replacement Filter Cartridge 
           Service Parts No. 610 339 7665

Connect the AC power cord to the projector and turn on the 
projector.

CLOSE

handle

OPEN

handle