Sanyo PDG-DXT10KL 사용자 가이드
2. Installation and Connections
24
Installing the Optional Color Wheel
The PDG-DXT10L projector comes with a four-segment color wheel installed. An additional six-segment color wheel is op-
tional. To replace the color wheel (located under the lamp cover adjacent to lamp 1) refer to the following guide.
tional. To replace the color wheel (located under the lamp cover adjacent to lamp 1) refer to the following guide.
Note:
Wait until the lamp house and the color wheel cool off.
Wait until the lamp house and the color wheel cool off.
1.
Loosen the captive screw (A)
on the lamp cover.
on the lamp cover.
2.
Remove the lamp cover by
sliding it in the direction of
the arrow (B).
sliding it in the direction of
the arrow (B).
3.
Unscrew the retaining screws
(x 4) on the four-segment
color wheel.
(x 4) on the four-segment
color wheel.