TallyGenicom 2440 사용자 가이드

4-13

NETWORK menu

The following settings are valid for the optional internal Ethernet adapter only.

BUSY LINE

DTR/RTS/SSD+/SSD-

Selects the signal indicating that the 
serial interface is in busy state (buffer is 
full, printer is out of paper or an error is 
detected). Valid only if the READY/
BUSY protocol has been selected.

DSR SIGNAL

VALID/INVALID

Sets the signal DSR (Data Set Ready) 
valid or invalid.

DTR SIGNAL

POWER UP/READY ON DTR is either set constantly to on 

(power up) or is used for handshaking 
(ready on).

BUSY TIME

200 ms/1 sec

Selects the busy time of the serial inter-
face.

IP ADDRESS

0,0,0,0 ... 255,255,255,255

Selects the IP address.

GATEWAY

0,0,0,0 ... 255,255,255,255

Selects the Gateway address.

NET MASK

0,0,0,0 ... 255,255,255,255

Selects the address of the Subnet mask.