GoVideo rv4000 제품 매뉴얼
RECORDING
51
You can record from an external component, such as a camcorder or VCR, connected to any of the DVD
Recorder+VCR’s external inputs.
Recorder+VCR’s external inputs.
1
Make sure the component you want to record from is connected properly to the DVD Recorder+VCR; see pages
15 and 18.
2
Use [ … †] to select the external input to record from.
• Tuner: Built-in tuner
• LINE1 : Audio/Video on front panel
• LINE2 : Audio/Video Input on back panel
• LINE1 : Audio/Video on front panel
• LINE2 : Audio/Video Input on back panel
3
Load a recordable disc or tape.
4
Set the desired Recording mode by pressing [REC MODE] repeatedly.
DVD: HQ (High Quality - 1 hr/disc), SP (Standard Quality - 2 hrs/disc), EP (Average Quality - 4 hrs/disc), or
SLP (Low Quality - 6 hrs/disc).
VCR: SP (Standard Play), SLP (Super Long Play - 3 times SP)
5
Press [REC (
●)] once.
Recording will start. The REC indicator lights on the front panel display.
Recording continues until you press [STOP] or the disc is full.
To record for a fixed length of time, see ‘One Touch Record‘ on page 46.
Recording continues until you press [STOP] or the disc is full.
To record for a fixed length of time, see ‘One Touch Record‘ on page 46.
6
Press [STOP (
■)] to stop recording.
Recording from External Components
Note
• If your source is copy-protected, you will not be able to record it using the DVD Recorder+VCR. See ‘Copyright
Notice‘ on page 7 for more details.
Recording from an External Input
Recording from an External Input
DF-L72F1N-LS(GB) 04.6.28 11:5 PM 페이지51