GoVideo dp5040 제품 매뉴얼

9

1  DC In Jack
2  Battery Release Button
3  Battery Charge Indicator
4  Battery Connectors

Before using the battery pack, make sure it is fully 

charged. You can charge the battery pack directly or 

while it is attached to the portable DVD player.

  Plug the supplied AC adapter into a standard 

power outlet, and then connect it to the DC IN jack 

on the left side of the battery pack.
•  You can also use the supplied cigarette lighter 

adapter in place of the AC adapter to charge 

the battery.

  Connect the battery pack to the back of the player 

as shown.

  Plug the supplied AC adapter into a standard 

power outlet, and then connect it to the DC In jack 

on the right side of the player.

  Turn off the player. The battery pack will NOT 

charge while the portable DVD player is powered 

on.

  The battery charge indicator will turn red while the 

battery is charging.

  The battery charge indicator will turn green when 

the battery pack is fully charged.

•  Press the Battery Release button on top of the 

battery pack to remove it.

•  Use the specified battery pack only.

•  May explode if battery pack is incorrectly 

replaced or disposed of in fire. Replace 

only with the same or equivalent type.

•  Do not short circuit.

•  Do not place the battery pack in direct 

sunlight or in excessively hot places (over 

140°F (60°C) such as the dashboard of 

cars.

•  Use only with the specified power 

adapter (12VDC, 1.25A).

  The battery charge indicator will turn red while the 

battery is charging.

  The battery charge indicator will turn green when 

the battery pack is fully charged.
•  Allow ~3 hours to fully charge the battery.
•  A fully charged battery permits ~3 hours of 

playback time.