Lexmark C760 사용자 설명서
122
Solving mailbox problems
Job prints from the
wrong tray or on the
wrong paper or
specialty media.
wrong tray or on the
wrong paper or
specialty media.
The operator panel menu
settings do not match the
media loaded in the tray.
settings do not match the
media loaded in the tray.
specified on the
operator panel and in the printer driver are correct for the job
you are printing.
you are printing.
Incorrect characters
print.
print.
You are using an
incompatible parallel
cable.
incompatible parallel
cable.
If you are using a parallel interface, make sure you are using
an IEEE 1284-compliant parallel cable. We recommend
Lexmark part number 1329605 (10 ft) or 1427498 (20 ft) for
the standard parallel port.
an IEEE 1284-compliant parallel cable. We recommend
Lexmark part number 1329605 (10 ft) or 1427498 (20 ft) for
the standard parallel port.
The printer is in Hex
Trace mode.
Trace mode.
If
Ready Hex
appears on the display, you must exit Hex Trace
mode before you can print your job. Turn the printer off and
back on to exit Hex Trace mode.
back on to exit Hex Trace mode.
Tray linking does not
work.
work.
Tray linking is not
configured properly.
configured properly.
To configure the linked trays:
• Make sure the Tray x Type value in the
menu
item in the
is the same for all linked trays.
menu
item in the
is the same for all linked trays.
Large jobs do not
collate.
collate.
Collate is not set to On.
Set
to On in the
or through the
printer driver.
Note: Setting
to Off in the driver overrides the
setting in the
.
The job is too complex.
Reduce the complexity of the print job by eliminating the
number and size of fonts, the number and complexity of
images, and the number of pages in the job.
number and size of fonts, the number and complexity of
images, and the number of pages in the job.
The printer does not
have enough memory.
have enough memory.
Add printer memory or an optional hard disk.
Refer to the Setup Guide for information on selecting memory
options to install.
options to install.
Unexpected page
breaks occur.
breaks occur.
The job has timed out.
Set
to a higher value from the
.
Symptom
Cause
Solution
Paper jams before
reaching the mailbox.
reaching the mailbox.
The mailbox and the
printer are misaligned.
printer are misaligned.
Realign the mailbox and the printer.
Refer to the Setup Guide for instructions.
for more information.
The mailbox is not
connected properly.
connected properly.
Check the electrical connection.
Refer to the Setup Guide for instructions on connecting the
mailbox to the printer.
mailbox to the printer.
Symptom
Cause
Solution