Bosch she43p22uc 사용자 가이드

다운로드
페이지 81
18
Dishwasher Features & Options
Wash Cycles *
* The cycles listed below vary by models.
Power Scrub/Auto Plus 
Cleans  items  having  baked-on  or  hard  dried  food  soils. 
These  items  may  require  soaking  or  hand  scouring. 
Designed to be used with heavily soiled dishes as well as 
pots and pans.
Auto Wash
Takes  the  guesswork  out  of  cycle  selection. The  sensors 
in the dishwasher automatically adjust the cycle length, 
temperature  and  water  changes  based  on  the  soil  load. 
This  cycle  contains  additional  sensor  decisions  when 
compared to other cycles.
Auto Delicate/Delicate Wash
Designed to be used with your fragile china and glassware, 
allowing you to get it perfectly clean without the hassle of 
hand washing or worry of damage in the dishwasher.
Regular Wash
Thoroughly cleans normal loads having loosely attached 
normal soiling.
Quick Wash
Cleans lightly soiled dishes and reduces overall wash time. 
Use this cycle to clean glasses and dessert dishes that may 
need to be re-used at the same event.
Rinse & Hold
Allows you to rinse the food soil of of a partial load and 
hold them in the dishwasher until there is a full load.
Eco Wash
Wash Cycle Options *
* The options listed below vary by models.
Options can be used along with wash cycle to customize 
load for personalized results:
1. Select wash cycle
2. Select option
3. Start dishwasher
Half Load
In  the  Power  Scrub,  Regular,  and  Auto Wash  cycles  you  
can  reduce  the  energy  and  water  consumption  when 
washing small, lightly soiled loads that ill approximately 
half the dishwasher’s capacity. 
To activate, select the Half Load button in addition to any 
of the three cycles listed above.
Top Rack Only
This  option  allows  you  to  save  energy  and  water  by 
washing loads small enough to ill the top rack only.
EcoAction
This option saves energy by reducing the water 
temperature.
Sanitize Option
All  models  are  designed  to  sanitize  the  loaded  dishes. 
Press the Sanitize Option button to activate the Sanitation 
features.  The  technical  sanitation  measures  may  also 
improve the drying results.
Delay Start
This  option  allows  you  to  delay  the  start  time  of  your 
dishwasher. To activate:
• 
Turn the dishwasher on.
• 
Select the desired wash cycle.
• 
Press  and  hold  the  Delay  Start  button.  Release 
when the desired delay time is shown in the display 
window.
This cycle is optimized to be even more energy eicient. 
Eg.  On  lightly  soiled  loads  it  uses  much  less  water  and 
energy than traditional cycles.