Partner Tech pt-5700 사용자 설명서

Delay Prior to Thermal -The Delay Prior To Thermal BIOS feature controls the activation of the Thermal 
Monitor's automatic mode. It allows you to determine when the CPU's Thermal Monitor should be activated in 
automatic mode after the system boots. For example, with the default value of 16 Minutes, the BIOS activates 
the Thermal Monitor in automatic mode 16 minutes after the system starts booting up.

Thermal Management - This item enables you to specify the Thermal Monitor1 (On die throtting) or Thermal 
Monitor 2 (Ratio & VID transition). Default setting is Thermal Monitor 1. 

TM2  Bus  Ratio  - This represents the throttle frequency for the Trimedia TM2 PCI bus interface. Enter any 
integer number between 0 and 255 inclusive to set this frequency..

TM2 Bus VID - This represents the throttle voltage for the Trimedia TM2 PCI bus interface. Choose a value 
between 0.8375V and 1.6000V inclusive.

Select boot sequence for onboard or bootable Add-in cards.

When enabled, this item provides protection against viruses that try to write to the boot sector and partition table of the 
hard disk drive. You need to disable this item when installing an operating system. We recommend that you enable 
anti-virus protection as soon as you have installed an operating system. The default setting is Disabled.

All processors that can be installed in this mainboard use internal level 1 (L1) and level 2 (L2) cache memory to 
improve performance. Leave this item at the default setting for better performance. The default setting is Enabled.

This item enables or disables ECC (Error Correction Code) error checking on the CPU cache memory. We recommend 
that you leave this item at the default setting. The default setting is Enabled.

Enable this item to shorten the power on testing (POST) and have the system start up faster. You can enable this item 
after you are confident that the system hardware is operating smoothly. The default setting is Enabled.

The BIOS loads the operating system from the disk drives in the sequence selected in these three fields. The default 
setting is CD-ROM/USB-ZIP/HDD0.

When enabled, the system searches all other possible locations for an operating system if it fails to find one in the 
devices specified under the First, Second, and Third boot devices. The default setting is Enabled.

This item defines if the keyboard Num Lock key is active when the system is started. The default setting is On.

If this item is enabled, you can use the following two items to set the typematic rate and the typematic delay settings 
for the keyboard. The default setting is Disabled.

Use this item to define how many characters per second are generated by a held-down key. The default setting is 6.

Use this item to define how many milliseconds must elapse before a held-down key begins generating repeat charac-
ters. The default setting is 250.