Alcatel-Lucent 6850-48 네트워크 가이드
OmniSwitch AOS Release 6 Network Configuration Guide
September 2009
page 8-1
8 Defining VLAN Rules
VLAN rules are used to classify mobile port traffic for dynamic VLAN port assignment. Rules are defined
by specifying a port, MAC address, protocol, network address, binding, or DHCP criteria to capture
certain types of network device traffic. It is also possible to define multiple rules for the same VLAN. A
mobile port is assigned to a VLAN if its traffic matches any one VLAN rule.
by specifying a port, MAC address, protocol, network address, binding, or DHCP criteria to capture
certain types of network device traffic. It is also possible to define multiple rules for the same VLAN. A
mobile port is assigned to a VLAN if its traffic matches any one VLAN rule.
There is an additional method for dynamically assigning mobile ports to VLANs that involves enabling
VLAN mobile tagging. This method is similar to defining rules in that the feature is enabled on the VLAN
that is going to receive the mobile port tagged traffic. The difference, however, is that tagged packets
received on mobile ports are classified by their 802.1Q VLAN ID tag and not by whether or not their
source MAC, network address, or protocol type matches VLAN rule criteria.
VLAN mobile tagging. This method is similar to defining rules in that the feature is enabled on the VLAN
that is going to receive the mobile port tagged traffic. The difference, however, is that tagged packets
received on mobile ports are classified by their 802.1Q VLAN ID tag and not by whether or not their
source MAC, network address, or protocol type matches VLAN rule criteria.
In This Chapter
This chapter contains information and procedures for defining VLAN rules through the Command Line
Interface (CLI). CLI commands are used in the configuration examples; for more details about the syntax
of commands, see the OmniSwitch CLI Reference Guide. Refer to
Interface (CLI). CLI commands are used in the configuration examples; for more details about the syntax
of commands, see the OmniSwitch CLI Reference Guide. Refer to
for information about the VLAN mobile tagging feature.
Configuration procedures described in this chapter include:
.
.
• Defining IP and IPX network address rules on
.
.
.
For information about creating and managing VLANs, see