Alcatel-Lucent ls 6248 사용자 가이드
TCAM Resources
67
3
• Filename – The name of the file
• Version – Binary code version
• Date – Version’s date
• Status – Indicates Image status
• Image After Reset – The Image file which is active on the unit after the device is
reset. The possible field values are:
• Image 1 — Activates Image file 1 after the device is reset.
• Image 2 — Activates Image file 2 after the device is reset.
Web – System, System Management, File Management, Active Image. Define the
fields. Click Apply.
fields. Click Apply.
Figure 3-20. Active image Page
TCAM Resources
The TCAM Resources Page display the availability of TCAM resources (
Ternary
Content Addressable Memory
) across the stack. TCAM is used for high-speed
searching throughout the stack, in order to perform security, QoS, and other types of
applications. In contrast with binary CAM, TCAM allows a third matching state of “X”
or “Don’t Care” bits in data searches ( the first two bit types are “0” and “1”), adding
more flexibility to searches. However, the need to encode three possible states
instead of two also adds greater resource costs.
The maximum number of rules that may be allocated by all applications on the
device is 1024.
The following table lists all applications that can allocate TCAM rules. Each
allocation has its specific allocation policy.
applications. In contrast with binary CAM, TCAM allows a third matching state of “X”
or “Don’t Care” bits in data searches ( the first two bit types are “0” and “1”), adding
more flexibility to searches. However, the need to encode three possible states
instead of two also adds greater resource costs.
The maximum number of rules that may be allocated by all applications on the
device is 1024.
The following table lists all applications that can allocate TCAM rules. Each
allocation has its specific allocation policy.