Franklin bw-10 빠른 설정 가이드
3
Installing Your Memory
Card
Installing Your Battery
Your product is powered by one 9-volt
battery. Follow these easy instructions
to install or replace it.
battery. Follow these easy instructions
to install or replace it.
1. Lift the battery compartment
lid on the back of your unit by
pushing in the tab and lifting
up.
pushing in the tab and lifting
up.
Follow the illustration on the back of
the unit when installing the battery.
the unit when installing the battery.
2. Insert the battery with the
positive terminal facing out.
3. Replace the battery cover.
If the battery door does not shut,
please check the position of the
battery.
please check the position of the
battery.
RESET
Push In Tab
Lift Out Lid
1
2
➤ Removing Book Cards
Warning: Never install or remove a
book card while your product is
transferring data. Any information that
was in the memory card can be corrupted
or erased.
book card while your product is
transferring data. Any information that
was in the memory card can be corrupted
or erased.
RESET
Push in Tab
RESET
Lift Up Lid
BOOKMAN
Memory
Card
BOOKMAN
Writer
1. Make sure that your product is
disconnected from the Serial
Port on your PC.
Port on your PC.
2. Align the tabs on the Memory
Card with the notches in the
BOOKMAN Writer slot.
BOOKMAN Writer slot.
3. Press the Memory Card down
until it snaps into place.