Franklin ttq-106 사용자 가이드
22
Changing the Battery
The batteries should be changed when the screen
contrast is too light even after adjustment. Before you
replace the batteries, you should have new batteries on
hand.
Warning! If the batteries completely lose power, all the
information stored in the phone list will be permanently
lost. Furthermore, any time that you change the batteries,
you risk losing all user-entered data, so always keep
contrast is too light even after adjustment. Before you
replace the batteries, you should have new batteries on
hand.
Warning! If the batteries completely lose power, all the
information stored in the phone list will be permanently
lost. Furthermore, any time that you change the batteries,
you risk losing all user-entered data, so always keep
written
copies of your databank information.
TTQ-106 Battery Replacement
T
TQ-106 uses one CR2032 battery. To change the battery,
follow these steps.
1. Using a Phillips screwdriver, unscrew and remove
1. Using a Phillips screwdriver, unscrew and remove
the back cover.
2. Install a new battery, with its plus sign (+) facing you.
3. Replace the back cover.
3. Replace the back cover.
TTQ-206 Batteries
TTQ-206 requires four AAA batteries (not included).
Battery Information
1. Different types of batteries or new and used
batteries are not to be mixed.
2. Only batteries of the same or equivalent type as
recommended are to be used.
3. Batteries are to be inserted with the correct polarity.
4. Exhausted batteries should be removed.
5. The supply terminals are not to be short-circuited.
4. Exhausted batteries should be removed.
5. The supply terminals are not to be short-circuited.
IDS-28004-00
Rev B
P/N 7201951