Fujitsu P1610 사용자 설명서
3
1. When you turn on or restart the computer there is a
beep and/or the following message appears on the
screen:
screen:
Error message - please run SETUP
program Press <F1> key to continue,
<F2> to run SETUP
program Press <F1> key to continue,
<F2> to run SETUP
2. If an error message is displayed on the screen, and
you want to continue with the boot process and start
the operating system anyway, press the [
F1
] key.
3. If an error message is displayed on the screen, and you
want to enter the setup utility, press the [
F2
] key.
4. When the setup utility starts with a fault present, the
system displays the following message:
Warning!
Error message
[Continue]
Error message
[Continue]
5. Press any key to enter the setup utility. The system
will then display the Main Menu with current
parameters values.
parameters values.
If your settings require it, you may be
asked for a password before the operating
system will be loaded.
asked for a password before the operating
system will be loaded.
M a i n M e n u