Fujitsu fi-4010CU 설치 설명서
Fujitsu USB Scanner Installation Procedures
Windows 98SE\ME\2000\XP\Vista
Rev082708A
Page 3 of 3
Installing ScandAll 21.
1. Create a new folder and name it Fujitsu Downloads.
2. Next go to the following link and click on
1. Create a new folder and name it Fujitsu Downloads.
2. Next go to the following link and click on
.
3. Fill in the pre-registration box when it pops up and continue to the drivers download
page.
4. Afterwards click on Software Utilities.
5. Double click on the file name and the File Download box will popup.
6. Click
5. Double click on the file name and the File Download box will popup.
6. Click
on
Save and then use the browse (or other folder navigation) button until you
have the Scandall Download folder you created in the Save In Box.
7. Click
Save.
8. When completed close the Download Complete window and go to the Scandall
Download folder.
9. Open the folder and you will see the saved Scandall file. Double click on the file to
unzip it and the WinZip* self-extractor box will popup. Click on browse and select the
Scandall Download folder, then click on Extract. The file will begin to unzip and
when finished a message box will report the number of files unzipped. Click on OK
and close WinZip.
Scandall Download folder, then click on Extract. The file will begin to unzip and
when finished a message box will report the number of files unzipped. Click on OK
and close WinZip.
10. In the Scandall Download folder locate the Scandall.exe file and double click.
Afterwards follow the prompts and when completed go to Step C.
Step C: Unlocking the shipping lock.
If your model scanner does not have a flatbed then proceed to Step D.
If your model scanner does not have a flatbed then proceed to Step D.
The flatbed model scanners typically include a lock on the flatbed designed to protect
the scanner during shipment. Before the scanner can be used the shipping lock must be
unlocked. To unlock it do the following:
1. Located the shipping lock slider tab or knob either underneath or at the end of the
the scanner during shipment. Before the scanner can be used the shipping lock must be
unlocked. To unlock it do the following:
1. Located the shipping lock slider tab or knob either underneath or at the end of the
scanner.
2. Slide or rotate the lock to the unlock position.
Step D: Connecting the Scanner.
Included with the scanner is a USB cable used to connect the scanner to the USB port of
your PC. Ensure that the cable is securely fastened at both ends.
Finally connect the power cord to the scanner and a wall outlet then turn on the scanner.
For those models without a power switch plug in the power supply to the back of the
scanner. The scanner power and LCD display will light up. Next after the scanner
completes its startup initialization the LCD will display the number one. This indicates
that the scanner is ready.
The New Hardware wizard will now pop up. Select search for the driver automatically
and follow the prompts. Since the driver is already installed on the hard disk drive you
do not need to select search the internet. When completed you will see the scanner
installed under Imaging devices in Device Manager.
your PC. Ensure that the cable is securely fastened at both ends.
Finally connect the power cord to the scanner and a wall outlet then turn on the scanner.
For those models without a power switch plug in the power supply to the back of the
scanner. The scanner power and LCD display will light up. Next after the scanner
completes its startup initialization the LCD will display the number one. This indicates
that the scanner is ready.
The New Hardware wizard will now pop up. Select search for the driver automatically
and follow the prompts. Since the driver is already installed on the hard disk drive you
do not need to select search the internet. When completed you will see the scanner
installed under Imaging devices in Device Manager.