LG bd645 사용자 가이드

17

C

onnecting

4.  Use W/S to select the [Resolution] option 

then press ENTER (b) to move to the third level.

5.  Use W/S to select the desired resolution then 

press ENTER (b) to confirm your selection.

 

y If your TV does not accept the resolution 

you have set on the player, you can set 
resolution to 480p as follows:
1.  Press B to open the disc tray.
2  Press Z (STOP) for more than 5 seconds.

 

y When you set the resolution to 480i with 

HDMI connection, actual resolution is 
outputted to 480p.

 

y If you select a resolution manually and then 

connect the HDMI jack to TV and your TV 
does not accept it, the resolution setting is 
set to [Auto].

 

y If you select a resolution that your TV 

does not accept, the warning message 
will appear. After resolution change, 
if you cannot see the screen, please 
wait 20 seconds and the resolution will 
automatically revert back to the previous 
resolution.

 

y The 1080p video output frame rate may 

be automatically set to either 24 Hz or 
60 Hz depending both on the capability 
and preference of the connected TV and 
based on the native video frame rate of the 
content on the BD-ROM disc.

 

y The resolution of the VIDEO OUT jack is 

always outputted at 480i resolution.

 

,

Note

Make one of the following connections, depending 
on the capabilities of your existing equipment.

 

y HDMI Audio connection (page 18)

 

y Digital Audio connection (page 18)

 

y 2CH Analog Audio connection (page 19)
Since many factors affect the type of audio output, 
see “Audio Output Specifications” for details (page 
51).

A digital multi-channel connection provides the 
best sound quality. For this, you need a multi-
channel Audio/Video Receiver that supports one 
or more of the audio formats supported by your 
player. Check the logos on the front of the Audio/
Video receiver and the manual. (PCM Stereo, PCM 
Multi-Ch, Dolby Digital, Dolby Digital Plus, Dolby 
TrueHD, DTS and/or DTS-HD)