RCA drd515rb 사용자 가이드

VOL UP/DOWN

Adjusts the audio volume.

DIGIT KEYS (0 - 9)

Use the digit keys to tune directly to a

channel. If you are in the menu system, use the digit keys to

enter numbers for the time, date, channel and passwords.

INPUT

In TV and VCR mode, press the INPUT button one or

more times to toggle through the available video inputs.

ANT

Lets you switch the source of the video signal from

satellite signals to an off-air antenna or cable signal.

TRANSPORT Buttons (REVERSE, PLAY, FORWARD, RECORD,

STOP, PAUSE) 

Use when controlling an auxiliary device, such

as a VCR or Laserdisc player. Note that the RECORD button is

used to schedule a timer recording when using a program guide.

The remote can be programmed to control most brands of

remote controllable TVs, VCRs, and cable boxes. The remote is

programmed to control most RCA, GE and ProScan TVs and VCRs.

The remote needs to be programmed to control other

manufacturers’ brands.

Using the Remote to Control a Second Satellite
Receiver

The remote can control two satellite receivers. From the Main

menu, select Options, then System Options, then Remote Setup.

Choose which button, SAT1 or SAT2, will control the receiver.

Changing the RF Remote Code

The remote can control the receiver using both IR (Infrared)

signals and RF (radio frequency) signals. IR signals require line of

sight to the receiver’s front panel remote sensor. RF signals can

control the receiver from other parts of your house–even

through walls.

Occasionally, due to interference or other RF devices, you may

need to change the remote and receiver RF code. Change the

code in the System Options menu.