Printronix SL4M 사용자 설명서
98
Chapter
4
EMULATION MENU
EMULATION Submenus
Select
This function allows you to activate any resident emulation listed in the menu.
The factory default is PGL.
The factory default is PGL.
There are two methods for selecting the desired emulation:
•
Select the emulation under the Select menu option and save it as
Power-up Config.
Power-up Config.
•
Send a host command to switch the emulation automatically (see the
appropriate Programmer’s Reference Manual for details).
appropriate Programmer’s Reference Manual for details).
Emulation Setup
Options for setting up the emulations. The options are PGL Setup, ZGL
Setup, TGL Setup, STGL Setup, IGL Setup, and DGL Setup. Refer to the
appropriate
Setup, TGL Setup, STGL Setup, IGL Setup, and DGL Setup. Refer to the
appropriate
Programmer’s Reference Manual.
PGL Setup Submenus
NOTE: The submenu descriptions do not include ZGL, TGL, IGL, STGL, and
DGL emulations.
Character Group and Character Sets
This menu item selects the character set used by the printer. See page 97 for
the available character sets.
the available character sets.
Select LPI
This is the number of lines to be printed per inch. For example, at 6 lpi there is
1/6 inch from the top of one print line to the top of the next print line.
1/6 inch from the top of one print line to the top of the next print line.
The options are 1 to 1000 LPI. The factory default is 6.0 LPI.
Define CR Code
This option controls the action of the printer when it receives a Carriage
Return code (0D hex) from the host computer. If this feature is enabled, each
time the printer receives a carriage return, it inserts an additional Line Feed
code (0A hex) into the data stream. Do not use this feature if the host
computer sends line feeds to the printer.
Return code (0D hex) from the host computer. If this feature is enabled, each
time the printer receives a carriage return, it inserts an additional Line Feed
code (0A hex) into the data stream. Do not use this feature if the host
computer sends line feeds to the printer.
•
CR = CR (factory default). Does not insert an extra line feed after each
carriage return.
carriage return.
•
CR = CR + LF. Inserts an extra line feed after each carriage return. The
next print position will be print position 1 of the next line.
next print position will be print position 1 of the next line.