Printronix l7032 참조 매뉴얼
Shading Mask
143
Comments
The KL command is used as part of the data contained in one of
the alphanumeric commands.
the alphanumeric commands.
Shading Mask commands must be turned on and off by
command. Any character data entered between the KL on and off
commands is shaded with the selected mask. Shading must be
turned off before any commands are used to change character
height, width, justification, or horizontal print position. Reverse
printing can be combined with shading.
command. Any character data entered between the KL on and off
commands is shaded with the selected mask. Shading must be
turned off before any commands are used to change character
height, width, justification, or horizontal print position. Reverse
printing can be combined with shading.
Examples The following sample commands illustrate shading. Four default
mask shading factors are available to produce vertical stripes
(KL00), horizontal stripes (KLFF), slanted stripes upper right to
lower left (KL01), and slanted stripes upper left to lower right
(KL04).
(KL00), horizontal stripes (KLFF), slanted stripes upper right to
lower left (KL01), and slanted stripes upper left to lower right
(KL04).
^PY^-
^M03,03,000IGP^KL00IGP^KLFFIGP^KL01IGP^KL04IGP^-
^PN^-
^PY^-
^M03,03,000IGP^KL00MASK^KL8DSHAD^KL02ING^-
^PN^-
^PY^-
^V05,05,000I^KLC2G^KHP^-
^PN^-
mask.ex3