Printronix l7032 참조 매뉴얼
Compressed Print
47
NOTE: Due to different printing technologies and dot sizes, some printers
may not be capable of printing small characters clearly.
Example
The following example illustrates changing character type from
the standard characters to 17.65 cpi characters.
the standard characters to 17.65 cpi characters.
^PY^-
Standard Characters in the Graphics Mode
^@C17^*Compressed 17.65 cpi characters after the Character Type
command^*
^@C10^-
^PN^-
Standard Characters in the Graphics Mode
^@C17^*Compressed 17.65 cpi characters after the Character Type
command^*
^@C10^-
^PN^-
NOTE: The second character type is sent to return VGL to standard 10 cpi
print.
Compressed Print
Purpose
Selects a compressed print font.
Mode
Graphics with a Standard Graphic Command selected
Format
(cc) #
x (cc)- data (cc)*
(cc) #0 (cc)-
(cc)
Represents the Special Function Control Code
(SFCC). Enter the specific SFCC for your VGL
configuration.
(SFCC). Enter the specific SFCC for your VGL
configuration.
#
x
Specifies the compressed print font to use. The
values for
values for
x and the corresponding compression
are shown in Table 5.
Table 5. Compressed Print Fonts
Selection
Code (
Code (
x)
Compressed Print Font
Characters per Inch (cpi)
Characters per Inch (cpi)
0
Terminate compressed print
1
10 cpi
2
12 cpi
3
13.33 cpi
4
15 cpi
5
17.65 cpi
6
OCR-A
7
OCR-B
8
12 cpi
9
15 cpi