Printronix l7032 참조 매뉴얼
Ignore Data
105
Ignore Data
Purpose
Instructs VGL to ignore data until a (cc)A command is received.
(See Comments below.)
(See Comments below.)
Mode
Graphics with a Standard Graphics Command selected
Format
(cc) X
data (cc)A
(cc)
Represents the Special Function Control Code
(SFCC). Enter the specific SFCC for your VGL
configuration.
(SFCC). Enter the specific SFCC for your VGL
configuration.
X
Specifies the Ignore Data command. Enter X to
ignore all subsequent characters until the Ignore
Data command is disabled.
ignore all subsequent characters until the Ignore
Data command is disabled.
data
Represents the data. Any text and characters sent
following the Ignore Data command are not
processed.
following the Ignore Data command are not
processed.
(cc)A
Disables Ignore Data. Enter the SFCC for your VGL
configuration immediately followed by A to disable
the Ignore Data feature in order to process
characters.
configuration immediately followed by A to disable
the Ignore Data feature in order to process
characters.
NOTE: No function occurs if a (cc)A command is used independent of the
(cc)X command.
Comments
Some host systems use fixed record lengths which causes the
end of a line of data in the data stream to be filled (padded) with
characters and spaces. If VGL file on your system contains
padded characters or spaces before the SFCC, this padded data
must be ignored before VGL can operate. When the X command
is sent to ignore data, all data following the command is ignored
until the (cc)A command to ignore data is disabled.
end of a line of data in the data stream to be filled (padded) with
characters and spaces. If VGL file on your system contains
padded characters or spaces before the SFCC, this padded data
must be ignored before VGL can operate. When the X command
is sent to ignore data, all data following the command is ignored
until the (cc)A command to ignore data is disabled.