Printronix l7032 사용자 설명서

 

 
6.2.10 White Spots 

 
1.  Make sure that all consumables are installed in the printer. 

 

2.  Make sure that all consumables are within their expected lifespan by checking the 

information in the maintenance & service log. Replace any consumable that has been in use 

longer than its expected lifespan. Follow the instructions in Chapter 4, Replacing 
Consumables. 
 

3.  Clean the printer. Follow the instructions in 5.5 Weekly Cleaning Procedureand 5.6 Monthly 

Cleaning Procedure. 
 

 the paper is damp, replace it with dry paper. 

If the paper is creased, replace it with uncreased paper. 

Note: 

For information about proper storage conditions for paper, see Section 3.3 Storing 

 drum. 

 

tions in 

 

use the OPC module may not be the cause of the problem, cover the OPC 

module with an opaque covering (such as a cardboard box, a large sheet of paper, 

le from damage by exposure to light. 

 

le does not fix the problem, reinstall the old OPC module in the 

printer. 
 

6.  Replace the fuser unit by following the instructions in Section 4.11 Replacing the Fuser Unit 

and Exit Rollers. 
 

If replacing the fuser unit does not fix the problem, reinstall the old fuser unit in the printer. 
 

7.  Call a service technician. 

4.  Check to see whether the paper is damp or creased. 

 
If

 

 

Paper. 

 
5.  Remove the OPC module and check for scratches on the OPC

If there are scratches on the OPC drum, replace the OPC module. Follow the instruc
Section 4.8 Replacing the OPC Module. 

Note: 

Beca

or a large cloth) when you remove it from the printer. The covering protects the 

OPC modu

If replacing the OPC modu

116