Printronix l7032 사용자 설명서
6.2.19 Blurred Image
1. Make sure that all consumables are installed in the printer.
m, cover the OPC
module with an opaque covering (such as a cardboard box, a large sheet of paper,
by exposure to light.
stall the old OPC module.
5.
xit rollers are worn or damaged, replace them.
. Replace the fuser unit by following the instructions in 4.11 Replacing the Fuser Unit and Exit
r.
7. Call a service technician.
2. Make sure that all consumables are within their expected lifespan by checking the
information in the maintenance & service log. Replace any consumable that has been in use
longer than its expected lifespan. Follow the instructions in Chapter 4, Replacing
Consumables.
Consumables.
3. Clean the printer. Follow the instructions in 5.5 Weekly Cleaning Procedure and 5.6 Monthly
4. Replace the OPC module by following the instructions in Section 4.8 Replacing the OPC
Note:
Because the OPC module may not be the cause of the proble
or a large cloth) when you remove it from the printer. The covering protects the
OPC module from damage
OPC module from damage
If replacing the OPC module does not fix the problem, rein
Inspect the exit rollers for dirt, wear, or damage. If the exit rollers are dirty, clean them. If the
e
6
If replacing the fuser unit does not fix the problem, reinstall the old fuser unit in the printe
124