Printronix l7032 사용자 설명서
Select LPI
This is the number of lines to be printed per inch. For example, at 6 lpi there is
This is the number of lines to be printed per inch. For example, at 6 lpi there is
p of one print line to the top of the next print line.
The
Sel
code (1-255) will be used as the Special Function Control Code
(SFCC). The SFCC denotes that the following data is a PGL command.
ult is 126.
r
Allows you to specify a decimal code from 0 through 255 to be used in place of SO (Shift Out) as
he alternate set of control function characters. See the
nt any data
rint all data before a PGL command.
without the slash. This option applies
t a slash.
printed with a slash.
e weight of the text
n increments of 1. The default is 340.
ter.)
p” item.
ean, Greek, Hebrew, Turkish Set, and UTF-8.
Incr
The
Disable.
(Thi
1/6 inch from the to
The options are 1 - 1000 LPI.
The options are 1 - 1000 LPI.
factory default is 6.0 LPI.
ect SFCC
You can specify which decimal
The range is 1-255, and the factory defa
Select SO Cha
the control code which allows access for t
description of the Code 128 barcodes in the PGL Programmer's Reference Manual for details.
The range is 0-255, and the factory default is 14.
The range is 0-255, and the factory default is 14.
Skip Cmd Prefix
Stands for Skip Command Prefix. This parameter determines if the printer will pri
before a PGL command is received.
Stands for Skip Command Prefix. This parameter determines if the printer will pri
before a PGL command is received.
Enable (the default). The printer ignores all data before a PGL command.
Disable. The printer will p
Disable. The printer will p
Slash 0
This parameter allows you to print the numeral “0” with or
to all character sets except OCR A and OCR B.
This parameter allows you to print the numeral “0” with or
to all character sets except OCR A and OCR B.
Disable (the default). Zero is printed withou
Enable. Zero is
Enable. Zero is
Standard Chars.
The Standard Chars option specifies the thickness or strok
fonts. The allowable range is 0 to 512, i
(This parameter has no effect in the L7032 prin
Standard Sets
The Standard Chars option specifies the thickness or strok
fonts. The allowable range is 0 to 512, i
(This parameter has no effect in the L7032 prin
Standard Sets
This item allows you to select various character sets available from the “Character Grou
The options are Standard, Arabic, Cyrillic, Europ
The factory default is Standard Sets.
The options are Standard, Arabic, Cyrillic, Europ
The factory default is Standard Sets.
Tall Characters
eases the point height of resident Intellifont characters.
Enable. Increases the point height of resident Intellifont characters approximately 10%.
Disable. Standard resident font character point height is maintained.
factory default is
s parameter has no effect in the L7032 printer.)
Disable. Standard resident font character point height is maintained.
factory default is
s parameter has no effect in the L7032 printer.)
149