Toshiba RD-X2U 사용자 매뉴얼
26
After all the necessary connections,
• Turn on the equipment connected to the
recorder.
• Select the corresponding video input on
your television.
Perform these selections whenever you operate
the recorder.
the recorder.
Turning the power on
Press the power button from the remote control or on
the front panel of the recoder.
Press the power button from the remote control or on
the front panel of the recoder.
When the power turns on, the ON/STANDBY indicator
changes color from red (standby mode) to green
(operation).
After a few seconds, a startup screen appears.
changes color from red (standby mode) to green
(operation).
After a few seconds, a startup screen appears.
The following icon will appear on the top right corner
of the screen. The icon will continue flashing
momentarily.
of the screen. The icon will continue flashing
momentarily.
While the icon is flashing, the recorder is checking
the status and reading data of the HDD and DVD-
RAM drive for startup. If the DVD-RAM drive does
not contain a disc, the recorder consumes less
time to startup, because it does not need to read
data from the DVD-RAM drive.
While the “Loading” icon is flashing, the recorder
cannot respond to any operations of buttons other
than CHANNEL and INPUT SELECT. Operate all
other functions after the icon has disappeared.
the status and reading data of the HDD and DVD-
RAM drive for startup. If the DVD-RAM drive does
not contain a disc, the recorder consumes less
time to startup, because it does not need to read
data from the DVD-RAM drive.
While the “Loading” icon is flashing, the recorder
cannot respond to any operations of buttons other
than CHANNEL and INPUT SELECT. Operate all
other functions after the icon has disappeared.
Note
When the recorder is turned on for the first time, the
following menu will be displayed after the “Loading” icon has
disappeared. See “A: Initial Settings” (
When the recorder is turned on for the first time, the
following menu will be displayed after the “Loading” icon has
disappeared. See “A: Initial Settings” (
page 28).
Turning the power off
Press the power button from the remote control or on
the front panel of the recoder.
Press the power button from the remote control or on
the front panel of the recoder.
The “Unloading” icon appears on the right corner of
the top of the screen, and the ON/STANDBY indicator
turns red. Then the power turns off.
the top of the screen, and the ON/STANDBY indicator
turns red. Then the power turns off.
Note
If the recorder freezes for about 15 minutes and will not
respond to any buttons, holding down the ON/STANDBY
button on the front panel for about 10 seconds can force the
recorder to turn off. However, this is an emergency measure,
which contains a risk of damage to data or discs. Avoid
casual use of this measure. If you try this while the recorder
is operating properly, especially while the “Loading” or
“Unloading” icon is flashing, it may result in re-initialization of
the HDD.
If the recorder freezes for about 15 minutes and will not
respond to any buttons, holding down the ON/STANDBY
button on the front panel for about 10 seconds can force the
recorder to turn off. However, this is an emergency measure,
which contains a risk of damage to data or discs. Avoid
casual use of this measure. If you try this while the recorder
is operating properly, especially while the “Loading” or
“Unloading” icon is flashing, it may result in re-initialization of
the HDD.
Loading
e.g.
Basic Setup
Starting up the recorder
Initial Settings
Channel Setting
Guide Channel Setting
Guide Channel Setting
No Use
3CH
3CH
Cable Box/DSS
Output Channel
DVD-RAM Physical Format
HDD Format
Output Channel
DVD-RAM Physical Format
HDD Format
TV
TV/CATV
AB C
SETUP
SETUP
Set
Select
Exit
SETUP
Return
Time & Date Setting
e.g.
Auto
Power button
ON/STANDBY indicator
Power button
REC MENU
ENTER
DVD
HDD
ENTER
LIBRARY
EDIT MENU
CONTENT MENU
DVD
HDD
V-REMOTE
ANGLE
TOP MENU
OPEN/CLOSE
SUBTITLE
MENU
RETURN
AUDIO
CHANNEL
FR
AM
E/A
DJU
ST
SL
OW
SK
IP
P
IC
TU
RE
SE
AR
CH
INSTANT SKIP
INSTANT REPLAY
DVD
TIMESLIP
RD-X2U.Prep.(E)p25-39
9/3/02, 9:47 AM
26