Toshiba M100 사용자 가이드
207
If Something Goes Wrong
Resolving a hardware conflict
5.375 x 8.375 ver 2.4.0
problem. Run Error-checking on the faulty diskette (for
instructions, see
instructions, see
Problems with the DVD-ROM or multi-function drive
You cannot access a disc in the drive.
Make sure the tray which holds the CD-ROM or DVD-ROM
is closed properly. Press gently until it clicks into place.
is closed properly. Press gently until it clicks into place.
Open the tray and remove the disc. Make sure the tray is
clean. Any dirt or foreign object can interfere with the laser
beam.
clean. Any dirt or foreign object can interfere with the laser
beam.
Examine the disc to see if it is dirty. If necessary, wipe it with
a clean cloth dipped in water or a neutral cleaner.
a clean cloth dipped in water or a neutral cleaner.
Replace the disc in the tray. Make sure that the disc is lying
flat, label side uppermost. Close the tray carefully, making
sure it has shut completely.
flat, label side uppermost. Close the tray carefully, making
sure it has shut completely.
You press the DVD-ROM or multi-function drive eject
button, but the DVD-ROM or multi-function drive tray
does not slide out.
button, but the DVD-ROM or multi-function drive tray
does not slide out.
Make sure the computer is connected to a power source and
turned on. The DVD-ROM or multi-function drive eject
mechanism requires power to operate.
turned on. The DVD-ROM or multi-function drive eject
mechanism requires power to operate.
If you need to remove a disc and cannot turn on the computer
(for example, if the battery is completely discharged), use a
narrow object, such as a straightened paper clip, to press the
manual eject button. This button is in the small hole next to
the DVD-ROM or multi-function eject button on the face of
the DVD-ROM/multi-function tray.
(for example, if the battery is completely discharged), use a
narrow object, such as a straightened paper clip, to press the
manual eject button. This button is in the small hole next to
the DVD-ROM or multi-function eject button on the face of
the DVD-ROM/multi-function tray.
Some discs run correctly but others do not.
Check the type of disc you are using. The DVD-ROM drive
supports the Digital Versatile Disc (DVD) formats DVD-
ROM, DVD-R (read-only), plus CD-ROM, CD-R (read-
supports the Digital Versatile Disc (DVD) formats DVD-
ROM, DVD-R (read-only), plus CD-ROM, CD-R (read-