Toshiba TDP-ET10 사용자 가이드

26

■  Connecting the power cord

  Insert the power cord plug into a wall 

■  Turning the power on

The blue LED at the Power key will start to 
fl ash, indicating standby mode.

  Activate the projector.

The projector can be activated by pressing the 
Power key on the control panel for 3~5 sec-
onds, or press the ON/Standby button on the 
remote control.

When the projector is activated, the red LED 
at the Power key starts to light up for seconds 
then off, all the blue LED on the control panel 
will light up and Start-up screen will display.

 WARNING

•  Do not look into the lens while the lamp is on. The strong light from the lamp may cause 

damage to your eyes or sight.

•  Do not block the air intake or exhaust. Doing so could cause a fi re due to internal 

overheating.

•  Do not place your hands, face, or any other objects near the air exhaust. Doing so 

could cause injury or could deform or break the object.

•  Turn off AC switch before plugging out power cable.