Netgear fsm7328s 작동 가이드
LED Descriptions
The front panel of the NETGEAR Model FSM7328S Managed Stackable Layer 3 Fast Ethernet Switch has
LEDs that provide a quick and accurate display of port speed, activity, and link state. The Gigabit Ethernet
SFP ports also have LEDs that show link and activity status. Table 2-1 summarizes the LEDs on the switch
and Gigabit Ethernet module.
LEDs that provide a quick and accurate display of port speed, activity, and link state. The Gigabit Ethernet
SFP ports also have LEDs that show link and activity status. Table 2-1 summarizes the LEDs on the switch
and Gigabit Ethernet module.
Table 2-1. Front Panel LEDs:
Label
Description
Power
Solid Green- Power is supplied to the switch &
operating normally
Blinking Green- Runtime code load in progress
Solid Yellow- POST in progress.
Blinking Yellow- POST fail or CPU fail .
Off- Power is Disconnected.
operating normally
Blinking Green- Runtime code load in progress
Solid Yellow- POST in progress.
Blinking Yellow- POST fail or CPU fail .
Off- Power is Disconnected.
Fan
Solid Red- Fan has failed
Off- Fan is present and operating normally
Off- Fan is present and operating normally
Status
Green on- Switch is operating normally
Amber on- Switch has failed to bootup
Amber on- Switch has failed to bootup
Master
Green – Switch is the master of the stack
Off – Switch is not the master of the stack
Off – Switch is not the master of the stack
24-10/100M Ports
One LED /Port
Link/ACT/SPD LED:
• Off- No 10/100Mbps link is established on the port.
• Solid Green- A valid 100Mbps link is established on
the port.
• Blinking Green- Packets transmission or reception
is occurring on the port at 100Mbps.
• Solid Yellow- A valid 10Mbps link is established on
the port.
• Blinking Yellow- Packets transmission or reception
is occurring on the port at 10Mbps.
4-10/100/1000M Ports
two LED / Port
Link/ACT LED:
• Off- No 10/100/1000Mbps link is established on the
port.
• Solid Green- A valid 1000Mbps link is established
on the port.
• Solid Yellow- A valid 10/100Mbps link is
established on the port.
• Blinking Green- Packets transmission or reception
is occurring on the port at 1000Mbps.
• Blinking Yellow- Packets transmission or reception
is occurring on the port at 10/100Mbps.
Stack LED:
• Green- Stack port has a valid link connection.
• OFF- Stack port does not have a valid link
connection
SFP Port (1000M bps only)
• Solid Green- Link up
• Blink Green- Activity, transmitting or receiving
packet in link up status
• Off- No Link detected
Page 11 of 24