Netgear GSM712 참조 가이드
Page 9 of 105
Features
The following list identifies the key features of the NETGEAR Model GSM712 Managed Gigabit Switch.
•
Ten 10/100/1000 Mbps auto sensing Gigabit Ethernet switching RJ-45 ports
•
Two GBIC ports that can be used for a variety of fiber or copper connections
•
Full Layer 2 switch management including:
o SNMP
o RMON (groups 1,2,3 and 9)
o IEEE 802.1Q (up to 64 Static VLAN groups)
o IEEE 802.1p (Class of Service)
o IEEE 802.1ad (Link Aggregation)
o IEEE 802.1D (Spanning Tree)
o IGMP snooping
o Port Mirroring
o Password access control
o TFTP firmware upgrade
o Multiple interfaces: Browser-based, Telnet, or SNMP application
o RMON (groups 1,2,3 and 9)
o IEEE 802.1Q (up to 64 Static VLAN groups)
o IEEE 802.1p (Class of Service)
o IEEE 802.1ad (Link Aggregation)
o IEEE 802.1D (Spanning Tree)
o IGMP snooping
o Port Mirroring
o Password access control
o TFTP firmware upgrade
o Multiple interfaces: Browser-based, Telnet, or SNMP application
•
Full compatibility with IEEE standards:
o IEEE 802.3i, (10BASE-T)
o IEEE 802.3u (100BASE-TX)
o IEEE 802.3ab (1000BASE-T)
o IEEE 802.3x (full-duplex flow control)
o IEEE 802.3u (100BASE-TX)
o IEEE 802.3ab (1000BASE-T)
o IEEE 802.3x (full-duplex flow control)
•
Auto-sensing and auto-negotiating capabilities for all ports
•
Auto Uplink™ on all ports to make the right connection
•
Automatic address learning function to build the packet-forwarding information table. The table contains up to 8,000 media access control
(MAC) addresses (that is, the switch can support networks with as many as 8,000 devices).
(MAC) addresses (that is, the switch can support networks with as many as 8,000 devices).
•
Full- and Half-duplex functions for all 10/100/1000 Mbps ports, operating at 10 or 100 Mbps.
•
Store-and-Forward transmission to remove bad packets from the network
•
Active flow control to minimize packet loss/frame drops:
o Half-duplex back-pressure control (10 or 100 Mbps)
o Full-duplex IEEE 802.3x pause frame flow control
o Full-duplex IEEE 802.3x pause frame flow control
•
LED indicators for port status monitoring:
o Power LED to indicate power on/off status
o Link LED to indicate link status
o Dual-color Mode LED to indicate speed, activity, duplex mode, and collision
o Link LED to indicate link status
o Dual-color Mode LED to indicate speed, activity, duplex mode, and collision
•
Easy migration from existing 10 Mbps network to 100 Mbps Fast Ethernet network and Gigabit Ethernet.
•
Easy upgrade path to add gigabit technology to your network
•
Flexible installation:
o Standalone desktop installation
o 19-inch standard rack-mount
o 19-inch standard rack-mount
•
Standard 1U case size