Netgear GSM712 참조 가이드
Page 21 of 105
Step 7: Connecting Devices to the Switch
The following procedure describes how to connect devices to the switch’s RJ-45 ports. Your NETGEAR Model GSM712 Managed Gigabit Switch
contains Auto Uplink™ technology, which allows you to attach devices using either straight-through or crossover cables.
contains Auto Uplink™ technology, which allows you to attach devices using either straight-through or crossover cables.
Figure 4-7. Connecting Devices to the Switch
20. Connect each device to an RJ-45 network port on the switch’s front panel (see Figure 4-9). Use Category 5 (Cat5) unshielded twisted-pair
(UTP) cable terminated with an RJ-45 connector to make these connections.
Note: Ethernet specifications limit the cable length between the switch and the attached device to 100 m (328 ft).