Netgear GSM712 참조 가이드
Page 87 of 105
Advanced> SNMP> Trap Setting
When on, the system will generate an SNMP trap upon a host authorization failure. This failure occurs when a host tries to gain access to the
system but the host’s IP is not in the SNMP host table.
Authentication traps
system but the host’s IP is not in the SNMP host table.
Authentication traps
o Enable The system will generate a SNMP trap upon a host authorization failure
o Disable The authentication traps will not be generated
o Disable The authentication traps will not be generated
All hosts in community strings with TRAP privileges will be notified when a trap condition occurs.
Figure 7-29: SNMP Management: Trap Settings