Netgear GSM712 사용자 설명서

6-20

Command Line Interface

The Static Addresses Table, allows the administrator to specify Media Access Control (MAC) 
addresses for specific ports that will not be purged from the bridge table by the aging function.  

Syntax

Where

<mac-address>

 = The MAC address you wish to keep on the table regardless of aging timers. 

The MAC address is a 48-bit string, expressed in hexadecimal with a colon separating every 8 bits. 
For example, 00:2d:3f:22:11:54. 

<ethernet interface number>

 = The Ethernet interface associated with the MAC address 

you specified. The interface number is expressed in x/y format, where x is the stack number 
(always 1 in the case with FSM726), and y is the port number. 

You can use this menu t configure permanently reachable multicast groups. The 

Static 

Multicast 

command let you create individual groups by entering the MAC address of static 

group

Syntax

Where

<mac-address>

 = the MAC address you wish to place into the static multicast group. 

<interface number>

 = the Ethernet interface associated with the static multicast group.

For example, if you want to add port 5 to static multicast group aa:aa:aa:10:30:3f, the command to 
do so would be

FSM726(config)# mac-address-table multicast static aa:aa:aa:10:30:3f ethernet 1/5

The 

disable

 command disables the switch’s dynamic address learning capability.