Netgear GSM712 사용자 설명서

4-8

Administration Console Telnet Interface

IP Assignment Mode. The user manually enters IP related information

•

Bootstrap Protocol, which allows the switch to discover its own IP address from a BootP 
server on the network

•

DHCP, which allows the switch to accept DHCP broadcasts from a DHCP server and 
automatically configures IP related information

The default setting is DHCP, to enable quick and easy set-up.  However, since you need to know 
the IP address of your switch to remotely manage it and DHCP assignments can change, change 
the IP assignment mode from DHCP to manual after the switch has obtained its IP address.

Note: In DHCP mode, if the switch fails to get a DHCP assignment, the switch defaults to 
192.168.0.1 as its IP address.

If you are in the manual mode and need to configure the IP information, enter a site-specific IP 
address, Gateway Address, and Network Mask (or subnet mask).  Consult your network 
administrator for the information. 

Press Ctrl-W to save any changes to NVRAM.

On this page, you can set up the port characteristics related to link operations. All of the 
parameters on this page are toggle settings. To change, or toggle, between options, hit Ctrl-M to 
move the curser to the ports field and simply strike the space bar when the appropriate option is 
highlighted.  To modify ports 17 to 26, you must tab through ports 1 to 16. The comments field is 
available for you to enter a description of the port.