Netgear GSM712 사용자 설명서
700 Series Managed Switch User’s Guide for Software v2.1
5-38
Web-Based Management Interface
SM-10004-02
•
Enable. The system will detect IGMP queries, report packets, and manage IP multicast traffic
through the switch
through the switch
•
Disable. The switch will forward traffic and disregard any IGMP requests.
Advanced>Multimedia Support> Static Multicast Groups
Figure 5-39: Multimedia Support > Static Multicast Groups
You can use this menu t configure permanently reachable multicast groups. The Static Multicast
Administration menu lets you create individual groups by entering a MAC address of your static
multicast group. Click on the ports to add them to the multicast group.
Administration menu lets you create individual groups by entering a MAC address of your static
multicast group. Click on the ports to add them to the multicast group.
Advanced> SNMP
You can manage this switch using the Simple Network Management Protocol (SNMP) from a
network management station. To do so, you must configure your switch to participate in the SNMP
community and you must add the SNMP host agent to the host table. This prevents unauthorized
SNMP access to your switch from non-approved SNMP hosts.
network management station. To do so, you must configure your switch to participate in the SNMP
community and you must add the SNMP host agent to the host table. This prevents unauthorized
SNMP access to your switch from non-approved SNMP hosts.
Support for these Standard MIBs is included:
•
MIB II (RFC1213)
•
Ethernet Interface MIB (RFC1643)
•
Bridge MIB (RFC1493)
•
Private Enterprise MIB (see the Resource CD for Managed Switches)