Netgear fsm7352ps 작동 가이드
Page 19 of 24
(FSM7352PS Config ) #stack
(FSM7352PS Config-stack ) #stack-port 1/0/51 ethernet
Step 9: Connecting a Redundant Power Supply to the Device
Your NETGEAR Model FSM7352PS ProSafe 48+4 Fast Ethernet L3 Managed Stackable Switch with PoE
has a redundant power supply connector in the back. You may choose to connect a DC-to-DC power
supply to the switch to ensure that it will not fail in case the primary power supply does. To connect an RPS
to the switch, first make sure the switch is turned off, and then connect the RPS to the switch as illustrated
below. Once all connections are completed, turn the switch back on.
has a redundant power supply connector in the back. You may choose to connect a DC-to-DC power
supply to the switch to ensure that it will not fail in case the primary power supply does. To connect an RPS
to the switch, first make sure the switch is turned off, and then connect the RPS to the switch as illustrated
below. Once all connections are completed, turn the switch back on.
Figure 3-5. Connecting the RPS