Netgear GSM7212 사용자 설명서
User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Switching Commands
8-49
December 2004, 202-10010-02
Mode
Interface Config
no set gvrp interfacemode
This command disables GVRP (GARP VLAN Registration Protocol) for a specific port. If GVRP
is disabled, Join Time, Leave Time and Leave All Time have no effect.
is disabled, Join Time, Leave Time and Leave All Time have no effect.
Format
no set gvrp interfacemode
Mode
Interface Config
set gvrp interfacemode all
This command enables GVRP (GARP VLAN Registration Protocol) for all ports.
Default
Disabled
Format
set gvrp interfacemode all
Mode
Global Config
no set gvrp interfacemode all
This command disables GVRP (GARP VLAN Registration Protocol) for all ports. If GVRP is
disabled, Join Time, Leave Time and Leave All Time have no effect.
disabled, Join Time, Leave Time and Leave All Time have no effect.
Format
no set gvrp interfacemode all
Mode
Global Config
set igmp
This command enables IGMP Snooping on the system. The default value is disable.
Note:
The IGMP application supports the following:
•
Global configuration or per interface configuration. Per VLAN configuration is unsupported
in the IGMP snooping application.
in the IGMP snooping application.
•
Validation of the IP header checksum (as well as the IGMP header checksum) and discarding
of the frame upon checksum error.
of the frame upon checksum error.
•
Maintenance of the forwarding table entries based on the MAC address versus the IP address.
•
Flooding of unregistered multicast data packets to all ports in the VLAN.
Format
set igmp
Mode
Global Config