Netgear GSM7212 사용자 설명서
User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Switching Commands
8-75
December 2004, 202-10010-02
Format
vlan protocol group add protocol <groupid> <protocol>
Mode
Global Config
no vlan protocol group add protocol
This command removes the <protocol> from this protocol-based VLAN group that is identified by
this <groupid>. The possible values for protocol are ip, arp, and ipx.
this <groupid>. The possible values for protocol are ip, arp, and ipx.
Format
no vlan protocol group add protocol <groupid> <proto-
col>
Mode
Global Config
vlan protocol group remove
This command removes the protocol-based VLAN group that is identified by this <groupid>.
Format
vlan protocol group remove <groupid>
Mode
Global Config
vlan pvid
This command changes the VLAN ID per interface.
Default
1
Format
vlan pvid <1-4094>
Mode
Interface Config
no vlan pvid
This command sets the VLAN ID per interface to 1.
Format
no vlan pvid <1-4094>
Mode
Interface Config
vlan tagging
This command configures the tagging behavior for a specific interface in a VLAN to enabled. If
tagging is enabled, traffic is transmitted as tagged frames. If tagging is disabled, traffic is
transmitted as untagged frames. The ID is a valid VLAN identification number.
tagging is enabled, traffic is transmitted as tagged frames. If tagging is disabled, traffic is
transmitted as untagged frames. The ID is a valid VLAN identification number.