Netgear GSM7212 사용자 설명서
User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Switching Commands
8-93
December 2004, 202-10010-02
no users snmpv3 authentication
This command sets the authentication protocol to be used for the specified login user to none. The
<username> is the login user name for which the specified authentication protocol will be used.
<username> is the login user name for which the specified authentication protocol will be used.
Format
users snmpv3 authentication <username>
Mode
Global Config
users snmpv3 encryption
This command specifies the encryption protocol and key to be used for the specified login user.
The valid encryption protocols are
The valid encryption protocols are
none
or
des
. The
des
protocol requires a
key
, which can be
specified on the command line. The
key
may be up to 16 characters long. If the
des
protocol is
specified but a key is not provided, the user will be prompted for the key. If
none
is specified, a key
must not be provided. The <
username>
is the login user name for which the specified encryption
protocol will be used.
Default
no encryption
Format
users snmpv3 encryption <username> {none | des [key]}
Mode
Global Config
no users snmpv3 encryption
This command sets the encryption protocol to none. The <username> is the login user name for
which the specified encryption protocol will be used.
which the specified encryption protocol will be used.
Format
no users snmpv3 encryption <username>
Mode
Global Config
Security Commands
This section describes commands used for configuring security settings for login users and port
users.
users.