Netgear GSM7212 사용자 설명서

Switching Commands

8-109

Primary Server IP Address  Indicates the configured server currently in use for authenti-

cation

Number of configured servers   The configured IP address of the authentication server

Max number of retransmits  The configured value of the maximum number of times a 

request packet is retransmitted

The configured timeout value, in seconds, for request re-trans-
missions

Yes or No

If the optional token 'servers' is included, the following information regarding the configured 
RADIUS servers is displayed.

IP Address of the configured RADIUS server

The port in use by this server

Primary or secondary

Yes / No

This command is used to display the statistics for RADIUS or configured server. To show the 
configured RADIUS server statistic, the IP Address specified must match that of a previously 
configured RADIUS server. On execution, the following fields are displayed.

show radius statistics [ipaddr]

Privileged EXEC

If ip address is not specified than only Invalis Server Address filed is displayed. Otherwise other 
listed fields are displayed.

Invalid Server Addresses  The number of RADIUS Access-Response packets received 

from unknown addresses.

The time interval, in hundredths of a second, between the most 
recent Access-Reply/Access-Challenge and the Access-Request 
that matched it from the RADIUS authentication server.

The number of RADIUS Access-Request packets sent to this 
server. This number does not include retransmissions.