Netgear GSM7212 사용자 설명서

9-4

DHCP Server Commands

This command specifies the IP addresses that a DHCP server should not assign to DHCP clients. 

Low-address and high-address are valid IP addresses; each made up of four decimal bytes ranging 
from 0 to 255. IP address 0.0.0.0 is invalid.

None

This command removes the excluded IP addresses for a DHCP client. 

Low-address and high-address are valid IP addresses; each made up of four decimal bytes ranging 
from 0 to 255. IP address 0.0.0.0 is invalid.

This command is used to specify the number in a range from 2-10, of packets a DHCP server sends 
to a pool address as part of a ping operation. Setting the number of ping packets to 0 is the same as 
‘no ip dhcp ping packets’ and will prevent the server from pinging pool addresses.

2

This command prevents the server from pinging pool addresses and will set the number of packets 
to 0.

0