Netgear GSM7212 사용자 설명서
User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
DHCP Server Commands
9-7
December 2004, 202-10010-02
show ip dhcp binding
This command displays address bindings for the specific IP address on the DHCP server. If no IP
address is specified, the bindings corresponding to all the addresses are displayed.
address is specified, the bindings corresponding to all the addresses are displayed.
Format
show ip dhcp binding [address]
Mode
Privileged EXEC and User EXEC
IP address
The IP address of the client.
Hardware Address
The MAC Address or the client identifier.
Lease expiration
The lease expiration time of the IP Address assigned to the client.
Type
The manner in which IP Address was assigned to the client.
show ip dhcp global configuration
This command displays address bindings for the specific IP address on the DHCP server. If no IP
address is specified, the bindings corresponding to all the addresses are displayed.
address is specified, the bindings corresponding to all the addresses are displayed.
Format
show ip dhcp global configuration
Mode
Privileged EXEC and User EXEC
Service DHCP
The field to display the status of dhcp protocol.
Number of Ping Packets
The maximum number of Ping Packets that will be sent to verify
that an ip address id not already assigned.
that an ip address id not already assigned.
Excluded Address
The ranges of IP addresses that a DHCP server should not assign
to DHCP clients.
to DHCP clients.
show ip dhcp pool configuration
This command displays pool configuration. If ‘*’ is specified, configuration for all the pools is
displayed.
displayed.
Format
show ip dhcp pool configuration {<name> | *}
Mode
Privileged EXEC and User EXEC
Pool Name
The name of the configured pool.
Pool Type
The pool type.
Lease Time
The lease expiration time of the IP Address assigned to the client.
DNS Servers
The list of DNS servers available to the DHCP client
Default Routers
The list of the default routers available to the DHCP client