Netgear FS728TP 설치 설명서
4.
Select the line displaying the details of your switch. If there are multiple smart switches in
your network, be sure to select the one you want to configure.
your network, be sure to select the one you want to configure.
5.
Click Web Access to view the switch log in screen.
6.
Enter the default password of password in lower case letters and click Login. The switch
will display the switch settings main page. Configure the switch for your network. Consult
the User’s manual on the Resource CD or the online help for assistance with configuration
procedures.
will display the switch settings main page. Configure the switch for your network. Consult
the User’s manual on the Resource CD or the online help for assistance with configuration
procedures.
After you log in to the switch, the main Web Access menu displays.
Use the configuration menu options to configure your switch.
Troubleshooting Tips
Here are some tips for correcting simple problems you may have.
Be sure to power on your PC and smart switch in the correct sequence.
Follow this sequence. Turn off the smart switch and computer. First, turn on the smart
switch and wait two minutes. Next turn on the computer.
switch and wait two minutes. Next turn on the computer.
Make sure the Ethernet cables are securely plugged in.
For each powered on computer connected to the smart switch with a securely plugged in
Ethernet cable, the corresponding smart switch LAN port status light will be lit.
Ethernet cable, the corresponding smart switch LAN port status light will be lit.
Make sure the network settings of the computer are correct.
In most cases, computers should be configured to obtain an IP address automatically via
DHCP. For help with this, please see the animated tutorials on the CD or the Reference
Manual Appendix C on the CD. If your network uses static IP addresses, be sure the
switch and computer are configured with valid IP addresses.
DHCP. For help with this, please see the animated tutorials on the CD or the Reference
Manual Appendix C on the CD. If your network uses static IP addresses, be sure the
switch and computer are configured with valid IP addresses.
Technical Support
Thank you for selecting NETGEAR products.
After configuring your smart switch, locate the serial number on the bottom label of your
product and use it to register your product at
product and use it to register your product at
http://www.netgear.com/register
. Registration
on the website is required before you can use our telephone support service.
Go to
http://www.netgear.com/support
for product updates and web support.
© 2006 by NETGEAR, Inc. All rights reserved.
NETGEAR and the NETGEAR logo are registered trademarks of NETGEAR, Inc. in the
United States and/or other countries.
United States and/or other countries.
Other brand and product names are trademarks or registered trademarks of their respective
holders. Information is subject to change without notice.
holders. Information is subject to change without notice.
201-11005-01
December 2006