Netgear GS504 설치 가이드

 

Model GS504 4-Port Gigabit Switch Installation Guide

 

The NETGEAR

 

™

 

 Model GS504 4-Port Gigabit Switch provides you with a low-

cost, high-performance network solution and is designed to anchor and
interconnect 10/100 megabits per second (Mbps) workgroups using gigabit fiber
links. 

The Model GS504 switch has the following key features: 

•

Four full-duplex gigabit fiber ports with standard SC connectors

 The ports support multimode optical fiber (SX) up to 525 meters (m) with 
50 

 

µ

 

m. With 62.5 

 

µ

 

m fiber cable, the maximum distance is 260 m.

•

Automatic address learning function to build the packet-
forwarding information table

The table contains up to 8,000 MAC addresses (that is, the switch can 
support networks with as many as 8,000 devices).

•

Full-duplex mode to double throughput of point-to-point connections by 
letting individual ports transmit and receive concurrently when the other end 
also supports full-duplex mode

The default is full-duplex mode if the connected device does not support N-
way negotiation. Most gigabit fiber links run in full-duplex mode.

•

Wire-speed filtering and forwarding of the traffic with no delay 

•

Store-and-forward intelligent processing to minimize erroneous packets on 
the network

•

Easy plug-and-play installation with no software to configure, which saves 
time and minimizes the potential for configuration errors