Netgear GSM7224 사용자 설명서

8-50

Switching Commands

This command sets the IGMP Group Membership Interval time on the system. The Group 
Membership Interval time is the amount of time in seconds that a switch will wait for a report from 
a particular group on a particular interface before deleting the interface from the entry. This value 
must be greater than the IGMP Maximum Response time value. The range is 1 to 3600 seconds.

260 seconds

This command sets the IGMP Group Membership Interval time on the system to 260 seconds. 

This command enables IGMP Snooping on all interfaces. If an interface which has IGMP 
Snooping enabled is enabled for routing or is enlisted as a member of a port-channel (LAG), 
IGMP Snooping functionality will be disabled on that interface. IGMP Snooping functionality will 
subsequently be re-enabled if routing is disabled or port-channel (LAG) membership is removed 
from an interface that has IGMP Snooping enabled.

Disabled

This command disables IGMP Snooping on all interfaces.